How do I connect my wireless printer without the CD?

Connect Via USB

Make sure the printer and computer are both plugged in and ready to go.
Turn on the computer, but leave the printer off.
When the computer has fully started up, connect the printer with a USB cable, then turn on the printer.

Can you use a printer without installing the software?

Yes, you can usually set up a printer without the disc, provided you have the printer’s USB cable. Also, you may need to download software from the internet for older printers. The instructions for doing this are set out in the steps above.

How do I install a printer on my computer without the CD?

Open ‘Control Panel’ and click ‘Devices and Printers’. Click ‘Add a Printer’ and the system will begin seeking the printer. When the printer you are looking to install is displayed, select it from the list and follow the on-screen instructions.

How do I reconnect my wireless printer?

Use the Wi-Fi Protected Setup (WPS) button on your router to connect the printer to your Wi-Fi network.

Place the printer near the Wi-Fi router.
Put the printer in WPS connection mode.
Within two minutes, press and hold the WPS button on the router until the connection process begins.

How do you install a printer from the disk?

If you need to install your printer and don’t have the installation disk, visit the printer manufacturer’s website to download the latest drivers to install your printer. If you want a CD or diskette to be sent to you instead of downloading the drivers, you’ll need to contact the printer manufacturer to order a new installation disk.

How to install a printer without CD?

Place the computer and printer next to each other and make sure that all the wires are connected to both the printer and the computer.

Turn the computer on and wait for it to boot up.

Plug the printer into the wall and then take the USB cord that is attached to the printer and plug it into the appropriate port on the computer.

Turn the printer on.

How do you set up a HP printer?

To set up an HP printer on a wireless (Wi-Fi) network, connect the printer to the network, then install the printer driver and software from the HP website from a computer with Windows. When prompted during the installation, select Wireless as the connection type.

How do you reinstall a wireless printer?

To reinstall a wireless printer onto your computer, click on the Start button and then the Start menu. Select the option for devices and printers. Choose the option to add a printer to activate the printer wizard. Select the option to add a network, wireless or Bluetooth printer. Select your printer from the list.