Turn the selector switch to the reset position and hold for at least 5 seconds. If the boiler does not relight, or the code is displayed regularly contact your installer or service engineer.
Who makes main eco boilers?
Baxi
Main Heating, a subsidiary of Baxi, has an impressive 75 years of experience in manufacturing domestic gas appliances and are proud of their ‘straightforward’, ‘no frills’ approach to heating solutions.
Where is the reset button on a combi boiler?
Most modern boilers will have a reset button that’s located on the boiler’s display. This will be located near where the fault code is being displayed. As an example, the reset button on a Vaillant EcoTec will be flame with a line through it. This is the reset and ignition button.
Is Main owned by Baxi?
Main products are supported by Baxi Customer Support, the service division of Baxi Heating UK.
What does E1 on my boiler mean?
If the code E119 is displayed (‘E1′ followed by ’19’), this means the pressure in the boiler has dropped and a water leak could be stopping the system working properly.
When should a heating timer be set?
The trick is to set your heating to come on half an hour before you get home or get up, and set it to switch off half an hour before you no longer need it. This is because an average home takes around 30 mins to heat up when the heating comes on and 30 mins to cool down when it goes off.
What is the main eco elite combi boiler?
The Main Eco Elite Combi is a fully automatic gas fired wall mounted condensing combination boiler. It is room sealed and fan assisted, and will serve central heating and mains fed Case Front Panel domestic hot water.
What are the technical parameters for boiler combination heaters?
Page 11 4.0 Technical Data Technical Parameters Technical parameters for boiler combination heaters Main Eco Elite Combi ErP Condensing boiler Low-temperature boiler B1 boiler Cogeneration space heater Combination heater Rated heat output Prated Useful heat output at rated heat output 25.9 28.6…
How safe is manual handling of a boiler?
Page 5 Safe Manual Handling General The following advice should be adhered to, from when first handling the boiler to the final stages of installation, and also during maintenance. Most injuries as a result of inappropriate handling and lifting are to the back, but all other parts of the body are vulnerable, particularly shoulders, arms and hands.
Does the boiler meet the requirements of the boiler regulations 1993?
The boiler meets the requirements of Statutory Instrument “ The Boiler (Efficiency) Regulations 1993 No3083” and is deemed to meet the requirements of Directive 92/42/EEC on the energy efficiency requirements for new hot water boilers fired with liquid or gaseous fuels:- Type test for purpose of Regulation 5 certified by: Notified Body 0086.
