VDSL
- Plug one end of the powerpack into an electrical outlet, and the other end into the MyRepublic WiFi hub+
- Connect the Grey cable from the DSL plug on the modem to the Jackpoint installed by your technician.
- Once everything is connected, power on the MyRepublic WiFi Hub+ using the black button on the back.
Can I use my own router with MyRepublic?
Sure you can! We do not impose any restrictions on which router brand or model you can use with our network, like VLAN tagging. You’re welcome to purchase your own preferred router.
How does MyRepublic connect to the Internet?
Getting connected – Using Wi-Fi
- Locate your Wi-Fi network name and Wi-Fi password on your Wi-Fi security card or on the white sticker located on the back of your Wi-Fi Hub.
- Connect any wireless device to the MyRepublic Wi-Fi Hub using the password provided.
How do I fix MyRepublic WiFi?
If you have changed the wireless settings manually and do not remember your password, try one of the following: Use a computer that is already connected to your network. If none of your computers are connected to the wireless network, connect via the Ethernet cable to one of your available Ethernet ports.
What router does MyRepublic use?
The MyRepublic Wi-Fi Hub is a AC1600 dual-band Wi-Fi Gigabit router. Supporting the latest ultra-fast 802.11ac standard, the Wi-Fi Hub is designed to support multiple devices and full HD video streams simultaneously.
Can I use my existing router for Fibre broadband?
Most Broadband Routers are not compatible with the technology used with Fibre Broadband. You will therefore need to swap your existing ADSL/Cable Router for a Fibre Router that provides the throughput speeds and connection required to maximise fibre broadband usage.
How do I troubleshoot MyRepublic?
If you have trouble connecting your wireless client via WPS, try one of the following:
- Wait until the WPS LEDs of the Wi-Fi Hub and other devices are off and then try again.
- Move the devices closer to each other to ensure they are within wireless range.
- Make sure that WPS is enabled on the Wi-Fi Hub: a.
How do I set up my MyRepublic Wi-Fi?
This is how your set up should look like: Plug one end of the power pack into an electrical outlet, and the other end into the MyRepublic Wi-Fi hub Connect an Ethernet cable between the Red WAN port on the back of the MyRepublic Wi-Fi Hub to the port 1 on the ONT (Alcatel Lucent) installed by your technician.
What kind of router is the MyRepublic hub?
MyRepublic Wi-Fi Hub The MyRepublic Wi-Fi Hub is a AC1600 dual-band Wi-Fi Gigabit router. Supporting the latest ultra-fast 802.11ac standard, the Wi-Fi Hub is designed to support multiple devices and full HD video streams simultaneously.
What items should I receive with my MyRepublic Wi-Fi hub?
Here are the items you should receive along with your MyRepublic Wi-Fi Hub. 2.4GHz Wi-Fi Network: MyRepublic XXXX 5GHz Wi-Fi Network: MyRepublic XXXX-5GHz Wireless Key: 1234ABCDEF MyRepublic Wi-Fi Hub Ethernet Cable Wi-Fi Security Card Power Adapter
How do I set up my Wi-Fi hub with my router?
1. Log in to your Wi-Fi Hub’s Router Management Console (please refer to the previous section if you need instructions on how to do so). 2. After successfully logging in, click on the “Setup Wizard” button in the upper right corner of the main page.
