Power the TP-Link TL-WA701ND using the barrel jack or PoE (Power-over-Ethernet) injector, and connect a computer to the access point using an Ethernet cable (if using the PoE injector, connect the LAN port to your computer, and the POE port to the access point).
What is client mode Tplink?
In Client mode, the access point connects your wired devices to a wireless network. This mode is suitable when you have a wired device with an Ethernet port and no wireless capability, for example, a smart TV, Media Player, or game console and you want to connect it to the internet wirelessly.
How do I setup my tp-link router as an access point?
How to change a TP-Link router to AP mode
- Connect a computer to the TP-Link router and launch a web browser.
- Visit the following router configuration page: 192.168.1.1.
- You are prompted to enter a username and password.
- Click the Mode button on the upper-right corner, select Access Point and click Save.
What is the default IP for TP-Link access point?
Normally your TP-Link Router’s default IP address is or
How do I use TP Link TL-WA801ND?
Connect the computer to the AP with an Ethernet cable. Open the web browser and type the IP address of the access point (Default is 192.168….How to configure TL-WA701ND V2, TL-WA801ND V2, TL-WA901ND V3 or TL-WA7210N as a repeater?
- LAN IP: 192.168. 0.1.
- SSID: test ABC.
- Encryption Type: WPA2-PSK.
- Passphrase: 11667063.
What is an access point client?
Access Point Client / Wireless Client Mode AP Client or Wireless Client mode allows the Access Point tobecome a wireless client to another AP. In essence the AP has nowbecome a wireless adapter card. You would use this mode to allow anAP to communicate with another AP.
How do I make a router an access point?
Use an Ethernet cable to connect the access point to the router. The cable should be inserted into a LAN port on the router and into the main Ethernet port on the access point. This introduces the access point to the router’s created local area network. Use an Ethernet cable to connect the router to the computer.
What IP address should I use for access point?
The default IP address of the Access Point or Range Extender is 192.168. 1.1 or 192.168. 1.254 or 192.168. 0.254.
How do I find the IP address of my access point?
How to find the IP address of an Access Point?
- Start > Run > type: cmd (to enter command prompt)
- Type: ipconfig /all.
- In the list, find the line that is your “Default Gateway”, this is your primary router/access point.
