All four parts of IS 3370 are revised. A new part to deal with construction practices, quality management and maintenance is required. Part 3 for prestressed LRC, is revised specifying limit state design, working stress design deleted and it is in line with IS 1343.
How many part of is 3370?
Part 2
Abstract. IS 3370 (Part 2): 2009 which covers the ‘Recommendations for design of concrete structure for storage of liquid’ was published in 1965. The code was split into four parts.
Is 3370-2009 Part I used for design of water tank?
IS:3370-2009 recommends the use of Limit State Design method for designing water storing tanks with some specified precautions. It adopts the criteria for limiting crack width. This is done by considering ultimate limit state and restricting the stresses to 130 MPa in steel so that cracking width is not exceeded.
Is code 3370 water tank?
intended for storage of liquids, mainly water. The requirements applicable specifically to reinforced concrete and prestressed concrete liquid retaining structures are covered in IS 3370 (Part 2), and IS 3370 (Part 3) respectively. 1.3 The criteria for design ofRCCstaging for overhead water tanks are given in IS 11682.
Is 3370 an IV?
IS 3370-4: Code of practice for concrete structures for the storage of liquids, Part 4: Design tables.
What is the minimum cement content for 3370?
As per codal provisions of IS 3370: Minimum grade of concrete for the R.C.C water tank is M30. Maximum cement content is 400 kg/m3 to take care of shrinkage effect. Minimum cement content is 320 kg/m3.
Which grade of concrete is used for water retaining structures?
Minimum grade of concrete for the R.C.C water tank is M30. Maximum cement content is 400 kg/m3 to take care of shrinkage effect.
Is 3370 Part 4 ): 1967 deals with 1 point General Rquirements reinforced concrete structures prestressed concrete structures design tables?
3.2 The unit shears at the fixed edge in Table 7 have been used for plotting the curves in Fig. 1 will be found useful for determination of shear or axial tension for any ratio of b/a and at any point of a fixed side edge. 2.3.
Which grade of concrete is used for water tank?
What is the ratio of M30 grade concrete?
Product Specification
| Grade Standard | M30 |
|---|---|
| Usage/Application | Construction |
| Packaging Size | 6 cubic meter |
| Compressive Strength | 30 MPa |
| Concrete Grade Mix Ratio | 1 Ratio 2 Ratio 2.87 (Cement, Water, Aggregates) |
What is part 11 of is 3370?
This standard ( Part 11 ) lays down the requirements applicable specifically to reinforced concrete structures for the storage of liquids, mainly water. These requirements ate in addition to the general requirements laid down in IS : 3370 ( Part II )-1965. Code of practice for plain and reinforced concrete ( second revision ).
What is ISC 3370-2 (2009)?
IS 3370-2 (2009): Code of Practice Concrete structures for the storage of liquids, Part 2: Reinforced concrete structures Disclosure to Promote the Right To Information
What is the scope of is 3370 Part II?
1. SCOPE 1.1 This standard (Part II) lays down the requirements applicable specifically to reinforced concrete structures for the storage of liquids, mainly water. These requirements are in addition to the general requirements laid down in IS : 3370 (Part I)-1965. *Code of practice for plain and reinforced concrete ( second revision ).
What is 3370 Part 2 of the 1965 code of practice?
Labels: IS 3370 PART-2 1965 CODE OF PRACTICE FOR CONCRETE STRUCTURES FOR THE STORAGE OF LIQUIDS PART II REINFORCED CONCRETE STRUCTURES.
