GM built and installed more than 25 million of the 3800 model V6 engines in its vehicles between 1975 and 2008….Here’s the full list:
- 1997-2003 Buick Regal.
- 2000-’03 Chevrolet Impala.
- 1998-’99 Chevrolet Lumina.
- 1998-2003 Chevrolet Monte Carlo.
- 1998-’99 Oldsmobile Intrigue.
- 1997-2003 Pontiac Grand Prix.
What is the bore and stroke of a Buick Special?
In initial form, it had a bore and stroke of 3.625 in × 3.1875 in (92.08 mm × 80.96 mm), for an overall displacement of 198 cu in (3.2 L). It weighed about 35 lb (16 kg) more than the aluminum engine, but was far cheaper to produce. Dubbed the Fireball V6, it became the standard engine in the 1962 Buick Special.
What kind of bell housing does a Buick 3800 V6 have?
Buick V6 engine. Though the pre-3800 rear-wheel drive (RWD) V6 uses the Buick, Oldsmobile, Pontiac (BOP) bellhousing pattern, an oddity of both the front-wheel drive (FWD) and RWD 3800 V6 is that although it is a 90° V6, it uses the GM 60° V6 bell housing (Metric Pattern). For use in the FWD applications,…
What kind of engine does a 1975 Buick LeSabre have?
The bore was enlarged to 3.8 in (97 mm), identical to the Buick 350 and Olds 307 V8s, yielding 231 cu in (3.8 L) displacement. 78,349 231s were installed in Buicks for 1975. Due to difficulties with the new fuel economy and emissions standards, the engine produced just 110 hp (82 kW). This engine was used in the following vehicles: LD5
What kind of engine does a 1995 Buick Regal have?
A 3800 Series I L27 naturally aspirated engine installed transversely in a 1995 Buick Regal. The LN3 was replaced by the 3,791 cc (3.8 L; 231.3 cu in) L27 in 1991-1992 and produced 170 hp (127 kW) from 1992 onward, this engine was referred to as the Series I 3800, or 3800 TPI (Tuned Port Injection).
