You need to move it closer to the base so that it is back in range. If you have your phone plugged into an extension, try it in the master socket instead. This is usually the one nearest your front door.
Why is my landline not ringing properly?
More common of the two reasons your handset telephone can’t be heard ringing, is that there is actually an issue with the ISP side of the network. The second reason is that, depending on your in-home wiring and if you have more than one phone point in your home, your internal wiring can be causing no ringer noise.
Why is my house phone crackling?
There may be an issue with the connection coming from your local exchange or the signal being sent from your landline provider. More often than not, the reason for a crackling noise in your cordless phone is due to interference from other electronic devices or a poor signal between your phone and the base unit.
What does a bent arrow on my BT phone mean?
missed call
Sorry the photo is left sided, but you will see there is a like V Shaped arrow in the top middle of the screen this means there is a missed call.
Can I use rechargeable batteries in my BT Sonus 1500?
Any replacement rechargeable batteries must be of the same type. BT accepts no responsibility for damage caused to your BT Sonus 1500 if you use any other type of batteries. If you need some help, call us on 0800 218 2182* or go to Page 4 • The base station should be plugged into the mains power socket all the time.
Can BTBT shop provide technical advice and assistance?
BT Shop is happy to provide technical advice and assistance on the BT range of products (please see the telephone numbers below to find the product you have a query about), however we regret to advise that this service cannot be extended to products from other manufacturers.
How do I make sure my BT inspire 1500 is working?
Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your BT Inspire 1500 works by sending radio signals between the handset and base. The strength of the signal depends on where you site the base. Putting it as high as possible ensures the best signal.
